Tempered 410 Stainless Steel Strip

410 Stainless Steel in its cold rolled, hardened and tempered condition is used in countless applications similar to Cold Rolled High Carbon Spring Steel Strip but with the advantages inherent in being stainless and at moderate cost. Its formability is good for its yield strength and hardness range . AISI 410 stainless steel in its pre-hardened condition is stocked by us in coils ready for slitting to exact widths for press feed operations or to exact size blanks. At C45 AISI410 develops a tensile strength of 1379MPA with yield at 1241MPA and elongation in 2 inches of 2%.

Available in 410 stainless strips, sheets, or cut lengths, in all thicknesses 0.01mm and thicker are obtainable and may be customized for you.

Mechanical Properties

Grade	Tensile Strength ksi (MPa) Min	Yield Strength 0.2% offset ksi (MPa) Min	Elongation (% in 50mm) Min	Hardness (Brinell) Max	Hardness (Rockwell B) Max
410	65 (450)	30 (205)	20	217	96

Benefits

· Cost-effective because of 410's small alloy composition
· Less expensive than cutlery-grade stainless steels.
· Moderate overall corrosion resistance
· Positive corrosion resistance against water, liquid, nitric acid, naphtha, acetic acid, sulfuric acid, and ammonia
· Ability to be hardened and tempered to achieve mechanical properties for different applications
· Exceptional hardness after it is heat treated
· Good ductility
· High strength
· Easy machinability